USA BASED Greaseweazle V4 USB Floppy Adapter Flux Reader Writer, Amiga Atari PC

Description

I am a USA based authorized reseller of
Zero Flux Development's Greaseweazle.
From Zero Flux Development:
Greaseweazle
allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analyzed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE, ...).
Greaseweazle V4
is the latest version, updated for mass production and with the following features:
Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
Buffered outputs, for communicating with older 5.25" and 8" disk drives
Integrated power connector for directly powering most 3.5" disk drives
Write-enable jumper can be removed for safer preservation of precious vintage disks
Supports flippy-modded 5.25" drives
Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
3 user-definable outputs (eg. 8" interface REDWC signal)
100% factory tested, and tested again by me before shipping
More information and documentation on my wiki:
https://github.com/keirf/Greaseweazle/wiki/V4-Setup
This listing is for the Greaseweazle V4 device only.
You will additionally require:
A disk drive (for example a PC 3.5" or 5.25" drive)
A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
Floppy drive power cable, or power supply
Recommended host OS:
Windows 8, Windows 10, Ubuntu Linux.
Windows 7 and most versions of macOS and Linux should also work (but less tested).