NO tube-5VUSB-ARDUINO NIXIE Thermometer+Humidity 3Tube-OpenSource-NIXIE TUBE ERA

Description

!!Item contains no NIXIE tube(Zero quantity of tube),you need to prepare the 3pcs of NIXIE tubes by yourself;
For C version,u need to prepare 2pcs of IN-14 NIXIE tube and 1pcs of IN-19A NIXIE tube(For diaplaying mark [oC] for temperature and [%] for Humidity;
For F version,u need to prepare 2pcs of IN-14 NIXIE tube and 1pcs of IN-19B (ИН-19Б) NIXIE tube(For diaplaying mark [F] for temperature and [H] for Humidity;
For video(For reference only):
https://youtu.be/iQgsSa4Idd4
Fully assembled and programmed with acrylic enclosure,you just need to plug ur NIXIE tubes on.
100% fully open source ARDUINO UNO pure C code.Please visit our website to download the instructions HEX and source code(
for customers only
)
,you can find URL on the right-bottom of the item pictures.
Item may need 3~5 working days for assembling and heat tesing!!!
If need 4-tube version ,please check:
-----in editing
Instructions
and more information,please visit:
The URL on the right-bottom of the item pictures.
Feature
(For reference only)
:
1.Silicon based
Temperature
+
Humidity
sensor outside PCB via I2C(via 4pin socket on PCB, can ext out <20cm by urself if u want),
high accurate, auto switch displaying the temperature and humidity info on NIXIE tube
;The first IN-14 left DOT will be light up if digits over 99 or less than 0;
2.5V USB powered and fully assembled PCB with acrylic enclosure and pluggable female pins on PCB,users only need to plug NIXIE tubes on it by hand;
3.Module based structure via socket,HV module can be replaced by hand, the MCU and driver chip also be install on PCB via IC socket,easy to repair;
4.RGB LED under the NIXIE tube,u can switch the LED color by clicking the switch on PCB,item supports a few pre defined pure colors and rainbow color loop function;
5.ARDUINO UNO (ATMega328) fully open source pure C source code;
6.New NIXIE driver circuit, nixies display in high brightness;
Contains:
1PCS NIXIE Thermometer PCB+Acrylic enclosure+1pcs Sensor
(Please prepare NIXIE tubes by urself).
Power adapter is not included
, any USB adapter may work,or you can connect it to the USB ports in your computer.
!!!We willl send the
degree C
version to you
In default
,
If need
degree F
version,please
left a note or send us a message
.!!!
IN-19 tube can display only 2 segments inside it,for C version,IN-19A tube be installed ,can display [oC] and [%]; for F version with IN-19B(IN-19
Б
) can display [F] for temperature and [H] for humidity;ARDUINO source code contains converting of  degree C  to degree F code in it
.
Notice:
Optional extra:
1.For USB2UART programmer with auto reset feature: +6.99 USD;(For easy to program the NIXIETM or u can use ur own programmer via the SPIPRG on PCB);
2.For 1PCS High Quality Brand 5V USB Power Adapter: +5.99 USD;
If need any extras,please left note to us,we will bill you via PAYPAL directly.
Payment methods:
We
ONLY accept PayPal on eBay selling
, other payment is not acceptable.
Please PAY within 7 days, or we'll re-selling the item.
Shipping:
We ship via
ePacket
Delivery
or
International Economy Package
with
tracking number
;
Please understand that
we can't control the mail speed
.If the mail delayed,please be patient.