-40%
KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight
KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight
KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight
KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight
KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight
KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight

KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE Backlight

$ 20.32

Availability: 95 in stock
  • Non-Domestic Product: No
  • Refund will be given as: Money Back
  • Condition: nos, new, old stock
  • Return shipping will be paid by: Buyer
  • Custom Bundle: No
  • Brand: Unbranded/Generic
  • All returns accepted: Returns Accepted
  • Modified Item: No
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: Russian Federation

    Description

    These are my
    KIT DIY Clock alarm IV-6 + IV-1 VFD Tube Nixie with RED/BLUE  Backlight
    You will receive a PCB printed circuit board and all parts for self-assembly of watches + 4 pcs of IV-6 + 1 pcs of IV-1 VFD. To the buyer, the full indicator scheme with all face values is sent.
    You only need to independently assemble the module from the received parts, connect the IV-6 + IV-1 nixie VFD, connect the power supply.
    You must have good soldering skills and understand electronics !!!
    Power supply unit + 12V 0,5A power supply not included, cost!
    Final finishing, fixing pipes, you have to do it yourself.
    This kit creates a great deal for creativity.
    The clock realized the most necessary, the minimum functionality.
    The clock is very simple and clear setting the setting time and alarm.
    The final trim of the hull, you have to do it yourself.
    This KIT DIYclock with VFD nixie tube, creates a big deal for creativity.
    Supply: standard 12V / 0.5A, (1A or more) DC (Power supply not  included !)
    Use clock batteries CR2032 to save settings when power is turned off.
    Batteries CR2032 ( 2 pcs)  - not included !
    The watch can be used in a car, with a power supply voltage of 12V.
    To connect the watch to the car's mains voltage, there is a special 3 pins connector on the clock board. When powering the car's voltage from the mains, remove the jumper XT.
    When used in a car, reserve batteries (2 pieces 2032) - In this case, it is possible not to install
    - time display format 24-hour
    -  Use clock battery to save settings when power is turned off.
    Features:
    The clock is assembled on Russian special chips, logic elements with low power consumption (the microcontroller in the clock is not used!).
    It is possible to change 3 kinds of LED backlighting (Red or Blue or alternately turn off Red / Blue in a second)
    * 4x IV-16 Russian VFD tubes (made  in 1980-90)
    * 1x IV-1 VFD separator (show on/off of alarm)
    * Lifetime of tubes VFD up to 10 years
    * 1 Alarm
    * Fade at night
    * 3 kinds of LED backlighting (Red or Blue or alternately turn off Red / Blue in a second
    * Change the color of the illumination of the nixie with the help of Jumper
    * 2 pcs Backup battery CR2032.  Data is not lost when power off
    * 5 button - Alarm, settin Alarm, Setting  hour,  Settin minute, reset minute Time,
    Attention
    , the switches do not work setting the time and alarm in Fade mode in night mode, in the dark. To set the time, light the room (artificial or daylight).
    * Power source - DC 12V  barrel plug 5.5mm/2.1mm ( "+" inside, "-" outside)
    * Power source 3 pin  for CAR  - DC 12V plug  ( "+" inside IGN, "+" battarey, "-" ground)
    * Consuming current - no more 300mA
    * Height of pcb with elements only 15 mm
    * Noiseless work
    * Dimensions of the clock PCB - 120mm(L) x 80mm(H) x 70mm(W)
    Contents of delivery:
    Printed circuit board
    Diagram with indication of face values and instructions for assembling and adjusting watches.
    All parts and lamps necessary for assembly (IV-6 + IV-1)
    Batteries CR2032 ( 2 pcs)  - not included !
    Supply: standard 12V / 0.5A, (1A or more) DC (Power supply not  included !)
    For this clock you need:
    * output voltage: 12V DC
    * input voltage: 110-230V (depending your country)
    * Output current: not less than 300 mA
    * Plug: barrel plug 5.5mm/2.1mm ( "+" inside, "-" outside)
    Accessibility for sale, a fully assembled watch with a case, is planned soon.
    The watch keeps working at the minimum supply voltage 9V.
    You can power the device with a maximum voltage of 19V, but for this, an additional radiator must be installed on the 7812 stabilizer.
    If you don’t want to assemble the watches yourself, you can buy from me ready-made watches, fully customized and tested.
    If you have questions, you can ask me them, write me a message, I will answer you for sure.
    Best wishes.
    -------------------------------------------------------------
    If you have questions, please feel free to ask before you bid.
    Seller accepts Paypal only.
    Winning bidders must pay within 2 days of auctions end.
    Will combine shipping on multiple purchases, just request an invoice before you pay.
    Clock watch IV6 + IV1 nixie small time - YouTube
    Video will open in a new window
    Using the eBay App? Paste link into a browser window:
    [isdntekvideo]